Cisco Certified Network Associate (200-301 CCNA) Part 1

×

Status message

Finding your location...
Cisco Certified Network Associate (200-301 CCNA) Part 1

Category: 
Course Hours: 
150
Course Type: 
Mentor Supported
  • Description
  • Objectives
  • Outline
  • Materials
  • Certification
  • System Requirements
  • Watch a Demo

This CCNA 200-301 Part 1 course prepares you for the exam associated with the Cisco Certified Network Associate certification.  This course provides the knowledge and skills required to successfully install, operate, and troubleshoot a small to medium size enterprise branch network. This course covers topics such as networking, switch management, configuring IPv4 and IPv6 networks, LANs, VLANs, and more.

This course includes access to a hands-on Practice-Lab for 200-301, which will allow candidates to have training in the practical application of the course concepts without having to buy any additional software and will prepare them for success on the certification exam.

Prerequisite(s): Students should have keyboarding and computer skills, and be comfortable navigating the internet. 

By the end of this course, you will be able to:

  • List the steps for small network implementation and security
  • Recall how to implement LANs, VLANs, and STP
  • Identify and be able to configure IPv4 routing protocols 
  • Recognize the concepts behind IPv6
  • Identify troubleshooting basics

CCNA Part 1 Module 1
Introduction to Networking  

  • Networking
  • TCP/IP Networking Model
  • Data Encapsulation Terminology
  • Fundamentals of Ethernet LANs
  • Physical Ethernet LANs UTP/Fiber
  • Sending Data in Ethernet Networks
  • WANs and IP Routing
  • Network Layer Features

CCNA Part 1 Module 2
Ethernet LANs

  • Using the Command-Line Interface
  • Accessing the Cisco Catalyst Switch CLI
  • Analyzing Ethernet LAN Switching
  • LAN Switching Concepts
  • Verifying and Analyzing Ethernet Switching

CCNA Part 1 Module 3
Switch Management

  • Configuring Basic Switch Management
  • Securing the Switch CLI
  • Enabling IPv4 for Remote Access
  • Configuring and Verifying Switch Interfaces
  • Status and Statistics

CCNA Part 1 Module 4
Implementing VLANs and STP

  • Virtual LAN Concepts
  • Trunking Configuration and Verification  
  • Troubleshooting VLANs and VLAN Trunks
  • Spanning Tree Protocol Concepts
  • STP and RSTP Basics
  • RSTP and EtherChannel Configuration
  • Configuring Layer 2 EtherChannel

CCNA Part 1 Module 5
Analyzing IPv4 Networks

  • Introduction to Subnetting
  • Analyze Subnetting and Addressing Needs
  • Plan the Implementation
  • Classful Network Concepts
  • Practice with Classful Networks

CCNA Part 1 Module 6
Subnet Masks

  • Analyzing Subnet Masks
  • Subnet Mask Conversion
  • Identifying Subnet Design Choices Using Masks
  • Defining a Subnet
  • Analyzing Existing Subnets: Binary
  • Analyzing Existing Subnets: Decimal

CCNA Part 1 Module 7
IPv4 Routing 

  • Installing Cisco Routers
  • Enabling IPv4 Support on Cisco Router Interfaces
  • IP Routing
  • Configuring IP Addresses and Connected Routes
  • Configuring Static Routes
  • IP Forwarding with the Longest Prefix Match

CCNA Part 1 Module 8
Troubleshooting IPv4 Routing

  • Routing in the LAN
  • VLAN Routing with Router 802.1Q Trunks
  • VLAN Routing with Layer 3 Switch SVIs
  • VLAN Routing with Layer 3 Switch Routed Ports
  • Problem Isolation Using the ping Command
  • Problem Isolation Using the traceroute Command
  • Telnet and SSH

CCNA Part 1 Module 9
OSPF

  • Comparing Dynamic Routing Protocol Features
  • OSPF Concepts and Operations
  • OSPF Areas and LSAs
  • Implementing Single-Area OSPFv2
  • Using OSPFv2 Interface Subcommands
  • OSPF Network Types
  • OSPF Neighbor Relationships

CCNA Part 1 Module 10
IP Version 6

  • Introduction to IPv6
  • IPv6 Addressing Formats and Conventions
  • Global Unicast Addressing Concepts
  • Unique Local Unicast Addresses
  • Implementing Unicast IPv6 Addresses on Routers
  • Connected and Local IPv6 Routes
  • Static IPv6 Routes

CCNA Part 1 Module 11
Wireless LANs

  • Comparing Wired and Wireless Networks
  • Wireless LAN Topologies
  • RF Overview
  • Analyzing Cisco Wireless Architectures
  • Anatomy of a Secured Connection
  • Wireless Privacy and Integrity Methods
  • Building a Wireless LAN
  • Connecting a Cisco AP

**Outlines are subject to change, as courses and materials are updated.**

Ed4Career is committed to being both environmentally conscious and making it easier for you to study! We’re making your education mobile! All of our textbooks are now provided as eTextbooks. You can access them on your laptop, tablet, or mobile device and can study anytime, anywhere.

The move away from physical books to eTextbooks means you get the latest, most up-to-date version available. This also makes your training more accessible, so you can study anywhere you have your phone or tablet. The best part is that all materials are included in your training cost so there are NO extra fees for books!

Upon successful completion of CCNA Part 1 and CCNA Part 2 courses, students will be prepared to sit for the Cisco Certified Network Associate Exam 200 – 301 CCNA certification exam.

**Certification exams are not included in the cost of the course.**

Internet Connection

  • Broadband or High-Speed - DSL, Cable, and Wireless Connections

*Dial-Up internet connections will result in a diminished online experience. Classroom pages may load slowly and viewing large audio and video files may not be possible.

Hardware Requirements

  • Processor - 2GHz Processor or Higher
  • Memory - 1 GB RAM Minimum Recommended

 

PC Software Requirements

  • Operating Systems - Windows 7 or higher
  • Microsoft Office 2013 or higher. Also, you could use a general Word Processing application to save and open Microsoft Office formats (.doc, .docx, .xls, .xlsx, .ppt, .pptx)
  • Internet Browsers - Google Chrome is highly recommended
    • Cookies MUST be enabled
    • Pop-ups MUST be allowed (Pop-up Blocker disabled)
  • The Kindle Reader App or VitalSource Bookshelf App are needed for many of our courses (No special equipment needed. This can be downloaded for FREE onto your computer.)
  • PowerPoint Viewer (if you do not have PowerPoint)
  • Adobe PDF Reader
  • QuickTime, Windows Media Player &/or Real Player

 

MAC Software Requirements

  • Operating Systems - Mac OS x 10 or higher with Windows
  • Mac office programs or a Word Processing application to save and open Microsoft Office formats (.doc, .docx, .xls, .xlsx, .ppt, .pptx)
  • Internet Browsers- Google Chrome is highly recommended
    • Cookies MUST be enabled
    • Pop-ups MUST be allowed (Pop-up Blocker disabled)
  • The Kindle Reader App or VitalSource Bookshelf App are needed for many of our courses (No special equipment needed. This can be downloaded for FREE onto your computer.)
  • PowerPoint Viewer (if you do not have PowerPoint)
  • Adobe PDF Reader
  • Apple QuickTime Media Player

 


Click on the school name below for purchasing info:

900 West Orman Avenue
Pueblo, CO 81004
United States
Phone: 727-824-7800 ext. 8

This course is also available at the following school:

Online School Finder
(Virtual Location)


To perform a search for schools based on a custom location please click here.